Quantity Check Surveying and Mapping Case Study
Datumate Case Study

Quantity Check Surveying

Share on facebook
Share on twitter
Share on linkedin
CountryUnited States
CompanyPleasants Construction, Inc.
Job TypeMapping for Quantity Check to Date
Project DateAugust, 2017
Project Size350,000 SF (8 Acre)
DroneDJI Phantom 4 Pro
Flight PatternVertical
Number of Images80
AccuracyBetter than 0.1ft (3 cm)
DatuSurvey savingsField and office – Less than 2 hours vs. more than 6 hours doing it the conventional way

We are a land development and construction company with our own rubble landfills and paving plant along with other companies, we needed a safer and time saving way to quantify our material piles for our plants and landfills also a way to do progress reports for our job sites. So we went to using UA Systems (drones). Datumate was part of the package for the drone we have and after the first time using it I saw how user friendly and accurate the software was not only on the drone but in the office.

Ben Brown, Pleasants Construction, Inc.

Project Description

Courts at Clarksburg is an area that is being prepared for building homes. The area surveyed is an open area where infrastructure work has been done. The objective of this project is to survey the area to check the level of filled slab areas in an effort to compare it to the planned levels. And also to check quantities of cut and fill needed to finish the prep work.

Data Acquisition

Phantom 4 Pro drone was used for quick, precise and easy image capturing. Best results are achieved with DatuFly™ app for drones, using vertical flight pattern at 250 feet (75meters) altitude, 75% front overlap and x60% side overlap. It took less than 30 minutes to get all the required images to achieve the required accuracy. 13 Ground Control Points were physically measured on the ground using RTK GPS, but only 6 were used to anchor the project precisely, while the rest were used to confirm accuracy.

Datumate Advantage

Safety was a big advantage as minimal number of GCP’s were measured in safe to reach area.  DatuSurvey™ Photogrammetry solution allowed the user to quickly mark the area where slab fill elevation level needed to me measured on the dense point cloud.

The marked area was exported to DXF format file and a high resolution geo=referenced ortho photo was generated and exported as well.  The exported surface as well as the final plan were overplayed on top of the ortho photo showing a very high precision of slab of the slab break lines.  Additionally, the elevation differences were marked showing a precision of less than 0.1 foot in most locations.

Then calculating the cut and fill volumes with a click of a button.   Surface was exported and volumes were calculated.

Volumes of available material in the area to fill the pond was done and figures are shown below.

DatuSurvey™ Enterprise Outputs

The drone’s imagery was analyzed and processed using DatuSurvey™ Enterprise photogrammetry software to quickly generate several outputs.

The measurement accuracy of all the points was better than 0.1 feet (3 cm) in 3D coordinates.

Surface File

A point file, including names, codes and coordinates of all new points was generated. Overall, 70 new points were drafted directly on the images.

True Orthophoto

A true orthophoto was generated from the vertical flight.

Dense Point Cloud & Texture Model

A very high density point cloud was generated.

See how your peers are using Datumate solutions...

A14 Road and Railway Intersection Surveying for SKANSKA

As part of the UK’s A14 improvement scheme which is one of the UK’s largest road projects, it was required to map a busy A14 highway junction including a highway intersection and a railway line. The complex mapping included multiple infrastructure layers (bridge, road and railway line) as well as an accurate snapshot of the surrounding buildings to avoid future damage claims during road reconstruction work.

Read this case study »

Quantity Check Surveying

Courts at Clarksburg is an area that is being prepared for building homes. The area surveyed is an open area where infrastructure work has been done. The objective of this project is to survey the area to check the level of filled slab areas in an effort to compare it to the planned levels. And also to check quantities of cut and fill needed to finish the prep work.

Read this case study »
residential surveying

Residential Community Surveying

The objective of this project is to survey a residential area and detect changes in structures for property taxation purposes. The area surveyed included about 50 houses which were clearly shown on an orthophoto and as a dense point cloud as well.

Read this case study »
Survey of Baseball Stadium

Baseball Stadium Surveying

Doppler radar is being implemented in baseball and softball venues around the world to track the trajectory of pitched and hit balls. All physical obstructions that are within the azimuth of the Doppler radar field of view were identified using the model.

Read this case study »
Scroll to Top